The most unfortunate thing that a Beats headphone owner can go through is their breakage. Now that you have a broken pair of Beats headphones in your hand, you are left with two choices: purchase a new pair of headphones, or fix your old ones.
If you are voting for the second option, let us move to the question: How to fix Beats headphones hinge?
The easiest way to fix a broken headphones hinge is to apply superglue between the broken parts and then wrap them with scotch tape. You can also use a plastic cable to tie and hold the parts together firmly.
When listing the most common reasons to experience a broken headphone hinge, applying too much pressure on it remains top of the list. Pressure can cause your headphones to squeeze or bend out of shape, resulting in breakage.
How To Fix Beats headphones hinge?
This article is a step-by-step guide on how to fix Beats headphones hinge.
Step 1: Prepare the equipment needed
The first step is to keep all the tools needed in the process at hand. This will ease the procedure. To fix your headphones hinge, you will need the following:
- Paper clips
- Baking soda or glue
- A screwdriver set
- And of course your broken headphones
Make sure that your scissors are not way too sharp so that you do not end up hurting yourself.
Step 2: Identify and inspect the broken parts
Now, carefully handle your headphones and set them on a clean and flat surface so that you can clearly identify the broken hinge. See for the loose pieces or other plastic bits of headphones that might get involved in fixing.
You will be able to locate a piece of plastic connected to your headphones by two small screws. Slowly, take the screws out to detach them from the small metal clips present on the plastic of your headphone. If they are very stubborn, use a screwdriver to open and detach them. Make sure that you are not applying too much pressure on your headphones so that they bend out of shape.
Step 3: Binding
Of all the loose pieces, examine to see which of the broken piece fits the hinge. Once you have figured out the right piece to fit in the headphone hinge, you will have to stick it with the headphone.
For this purpose, use a paper clip to hold the pieces together if they are just loose, or use a tape if broken completely. Check to see if the hinge fits perfectly. If yes, we will have to use a permanent method to keep them together.
Follow these steps to bind the hinge to the headphones:
- Combine both superglue and baking soda to create a cement-like consistency.
- Apply the product between the hinge and the headphone
Step 4: Drying
Allow your headphones to sit and let them dry for over 24 hours at room temperature. You can also use a dryer for this purpose.
And here is how to fix beats headphones hinge. Simply following the above-mentioned steps will get it all sorted.
Frequently asked questions
While fixing your beat headphones hinge you may have some questions. Below are some frequently asked questions that you need to know.
Why do my headphones keep breaking?
The most common reason to cause the breaking of your headphones is misused. If you are taking proper care of your headphones, also depending on the quality of headphones, they can last a lifetime. However, if you are throwing your headphones here and there, applying pressure or stress on them, they are at risk of breakage.
Therefore, it is recommended to keep them properly. Otherwise, you will have to see how to fix broken headphones plastic.
What are some common issues seen in headphones?
Usually, the headphones are prone to the following issues:
- Broken hinges
- Broken band
- Snapped band
- Expired cushion or leather
- Broken plastic
Fixing headphones you need to just follow my simple DIY steps to fix your beats headphones hinge. All of these steps are simple and you can follow them at home easily even if you do not have any technical information about headphones.
Using headphones daily exposes them to different issues. If you have a broken hinge, this article sums up how to fix beats headphones hinge.