Are you new to using Skullcandy Jib wireless earbuds? If yes, you might struggle to face them with your device. Keeping your struggle in mind, we have developed this guide to walk you through the whole process. To experience the smooth pairing of your earbuds, read to the end how to pair Skullcandy Jib wireless earbuds.
How to pair Skullcandy Jib Wireless Earbuds? We find out
Skullcandy Jib wireless earbuds can be paired with any Bluetooth device. Read ahead to understand how to pair your Skullcandy Jib wireless earbuds.
You must follow the steps given below on how to pair Skullcandy Jib wireless earbuds to your device.
- Turn on the pairing mode on the earbuds. This allows other devices to discover them.
- Take out the earbuds from the case. Turn them off by pressing the power button for a few seconds. You have to do this with both earbuds separately.
- The power button should be pressed on both earbuds simultaneously. Keep pressing for around ten seconds. This will result in a device reset.
- Put your Jib wireless earbuds back in the case.
- Wait for the LED indicator to turn red on both earbuds. Take both earbuds out of the case once the indicator starts flashing red.
- Now, you should hear a beep. This beep indicates that both of the earbuds are in sync with each other.
- Open the ‘settings’ menu on the device you intend to pair with your Skullcandy Jib wireless earbuds, e.g., smartphone, laptop, etc.).
- Turn on Bluetooth on your device.
- Choose ‘available devices’ or ‘add new device’. Once your earbuds’ name appears on the list pick them and press ‘connect’.
- If the Skullcandy Jib wireless earbuds have successfully paired, you will now be able to hear audio.
Things That Will Come in Handy When You Pair Your Devices
After knowing how to pair Skullcandy Jib wireless earbuds, here are a few tips that will help you ensure that the pairing goes smoothly:
- Your Skullcandy Jib wireless earbuds should be fully charged.
- You can try to pair your devices without resetting the earbuds. However, we will advise that you reset your earbuds before use so that the process goes on without any interruption.
- The earbuds and the device you want to pair them with should be as close as possible to each other.
- Skullcandy Jib Wireless headphones can be paired with only one device at a time. If you want to connect the earbuds to another device, you must reset them.
- Don’t forget that once you have turned the Bluetooth on, you have about 5 minutes to pair the devices. If you wait longer than 5 minutes, one of the devices might be unable to discover the other one.
Pairing Skullcandy Earbuds To iPhone
Learn how to use earbuds with iPhone:
- Place your earbuds in pairing mode.
- Open Settings on your iPhone.
- Turn the Bluetooth on.
- From your devices list, select your Skullcandy earbuds.
- Click on connect.
Pairing Skullcandy Earbuds with an Android
- Place your earbuds in pairing mode.
- Go to the Settings app on your Android device.
- Tap Connections.
- Ensure that Bluetooth is on.
- Select your Skullcandy earbuds.
- Tap on connect
Pairing Skullcandy Earbuds to a Mac Device
- Place your earbuds in pairing mode.
- Click on the Apple icon.
- Select System Preferences.
- Select Bluetooth and make sure that it is on.
- Select your Skullcandy earbuds.
- Tap on connect.
Pairing Skullcandy Earbuds to a Windows Device?
- Select the Start Button.
- Click on Settings.
- Select Bluetooth and ensure that Bluetooth is enabled.
- Click on Other Devices.
- Select your Skullcandy earbuds.
- Click on Connect.
This guide explains how to pair Skullcandy Jib wireless earbuds. Hopefully, after following the above-mentioned steps you will be able to pair them successfully.
Frequently Asked Questions
How to put Skullcandy earbuds in pairing mode?
To put your headphones in pairing mode:
- Make sure that the device is powered off.
- If it is on, press the power button for 3 seconds to turn it off. When it is off, press and hold the power button for 5 seconds. The headphones will enter pairing mode.
What can I do if my Skullcandy earbuds are not pairing?
If your earbuds do not pair after choosing them in your Bluetooth settings, follow the given steps:
- Choose to forget Method Active on your device.
- Turn Method Active off and back on.
- It will enter pairing mode.
- Choose Method Active in new devices in your Bluetooth settings and it will pair now.
How do I factory reset my Skullcandy earbuds?
You can factory reset your earbuds through the following steps:
- Press down on both power buttons on each earbud for at least six seconds.
- Make sure they are powered off.
- Hold both power buttons for ten seconds or more. This will reset your earbuds.
Why won’t my Skullcandy earbuds show in Bluetooth?
It is possible that the two devices are not close enough to each other to get connected. The devices must be within five feet of each other to be paired. Sometimes, it can be other reasons as well, but you just have to reset your earbuds and repair them.
Why will only one of my Skullcandy earbuds connect?
Many times, the problem involves the connection between devices. So you should disconnect your earbuds from your phone and then try to repair them. However, it is possible that your device is at fault. Hence, you should get it checked to eliminate that fault.